Toyota Land Cruiser Quiz
Cooling

Installation

In this manual: Cooling
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
010203040501914N·mlb·ft
Tightening torque found on this page

1. PLACE THERMOSTAT IN WATER INLET HOUSING

PLACE THERMOSTAT IN WATER INLET HOUSING

(a) Install a new gasket to the thermostat.

(b) Insert the thermostat into the water inlet housing with the jiggle valve facing straight upward.

HINT: The jiggle valve may be set within 30 of either side of the prescribed position.

2. INSTALL WATER INLET

Install the water inlet with the 3 nuts.

Torque: 19 N·m

3. FILL WITH ENGINE COOLANT

4. START ENGINE AND CHECK FOR COOLANT LEAKS

5. RECHECK ENGINE COOLANT LEVEL

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.