Toyota Land Cruiser Quiz
Starting

Starter relay

In this manual: Starting
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

INSPECTION

1. REMOVE STARTER RELAY (Marking: "ST")

REMOVE STARTER RELAY (Marking:

Remove the relay box cover and starter relay.

2. INSPECT RELAY CONTINUITY

INSPECT RELAY CONTINUITY

(a) Using an ohmmeter, check that there is continuity between terminals 1 and 2.

If there is no continuity, replace the relay.

(b) Check that there is no continuity between terminals 3 and 5.

If there is continuity, replace the relay.

3. INSPECT RELAY OPERATION

INSPECT RELAY OPERATION

(a) Apply battery voltage across terminals 1 and 2.

(b) Using an ohmmeter, check that there is continuity between terminals 3 and 5.

If there is no continuity, replace the relay.

4. REINSTALL STARTER RELAY

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.