Toyota RAV4 Quiz
Horn

Low pitched horn

In this manual: Horn
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
12steps
~72min
3/5difficulty
Done 0 of 12
Components
Toyota RAV4. Low pitched horn

Removal
  1. Remove radiator support opening cover (see page et-4)
  2. Remove front fender liner lh (see page et-4)
  3. Remove front fender liner rh (see page et-4)
  4. Remove front bumper cover (see page et-5)
  5. Remove low pitched horn
    Toyota RAV4. Remove low pitched horn

  1. Disconnect the horn connector.
  2. Remove the bolt and horn.
Inspection
  1. Inspect low pitched horn
Toyota RAV4. Inspect low pitched horn

  1. Apply battery voltage to the horn and check the operation of the horn.
Ok

If the result is not as specified, replace the horn.

Installation
  1. Install low pitched horn
Toyota RAV4. Install low pitched horn

  1. Place the stay onto the baffle part of the radiator support upper, and then install the horn with the bolt.
Torque: 19.5 N*m (199 kgf*cm, 14 ft.*Lbf)
  1. Connect the horn connector.
  2. Install front bumper cover (see page et-11)
  3. Install front fender liner rh (see page et- 12)
  4. Install front fender liner lh (see page et- 12)
  5. Install radiator support opening cover (see page et-12)

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.