Toyota RAV4 Quiz
Exterior

Removal

In this manual: Exterior
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
16steps
~96min
4/5difficulty
Done 0 of 16
Notice:

Do not heat the vehicle body, emblem and name plate excessively.

Hint:

When removing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.

Standard heating temperature
  1. Remove no. 1 Back door emblem assembly
Toyota RAV4. Remove no. 1 Back door emblem assembly

  1. Put protective tape around the emblem.
  2. Insert a piano wire between the vehicle body and emblem.
  3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
  4. Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.
Notice:
  • If reusing the emblem, take care not to damage the emblem.
  • Be careful not to damage the vehicle body.
  1. Remove back door name plate
Toyota RAV4. Remove back door name plate

  1. Put protective tape around the name plate.
  2. Insert a piano wire between the vehicle body and name plate.
  3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
  4. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.
Notice:
  • If reusing the name plate, take care not to damage the name plate.
  • Be careful not to damage the vehicle body.
  1. Remove no. 1 Back door emblem
Toyota RAV4. Remove no. 1 Back door emblem

  1. Put protective tape around the emblem.
  2. Insert a piano wire between the vehicle body and emblem.
  3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
  4. Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.
Notice:
  • If reusing the emblem, take care not to damage the emblem.
  • Be careful not to damage the vehicle body.
  1. Remove no. 4 Back door name plate (for 4wd)
Toyota RAV4. Remove no. 4 Back door name plate (for 4wd)

  1. Put protective tape around the name plate.
  2. Insert a piano wire between the vehicle body and name plate.
  3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
  4. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.
Notice:
  • If reusing the name plate, take care not to damage the name plate.
  • Be careful not to damage the vehicle body.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.