Toyota RAV4 Quiz
Tire and wheel

Tire pressure warning ecu

In this manual: Tire and wheel
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
8steps
~48min
2/5difficulty
Done 0 of 8
Components
Toyota RAV4. Tire pressure warning ecu

Removal
  1. Disconnect cable from negative battery terminal
Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  1. Remove glove compartment door assembly (see page ip-20)
  2. Remove tire pressure warning ecu
    Toyota RAV4. Remove tire pressure warning ecu

  1. Disconnect the connector.
  2. Remove the bolt and ecu.
Installation
  1. Install tire pressure warning ecu
Toyota RAV4. Install tire pressure warning ecu

  1. Install the ecu with the bolt.
Torque: 4.5 N*m (46 kgf*cm, 40 in.*Lbf)
  • Connect the connector.
    1. Install glove compartment door assembly (see page ip-25)
    2. Connect cable to negative battery terminal
    3. Register transmitter id (see page tw-10)
    4. Inspect tire pressure warning system

    Test yourself

    A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.