Toyota Sienna Quiz
Engine

Charge Warning Light Comes ON while Driving

In this manual: Engine
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read
1special tools

INSPECTION PROCEDURE

1 CHECK LOCK FUNCTION OF CLUTCH PULLEY

(a) Check the lock function with the pulley installed in the vehicle.

(1) Visually check that the rotor in the generator operates with the engine started.

(b) Check the lock function with the pulley removed from the vehicle.

(1) Remove the generator pulley cap. Using SST, hold the generator rotor.

(2) Turn the clutch pulley clockwise and check that the outer ring locks.

OK: The outer ring locks.

SST 09820-63020

CHECK LOCK FUNCTION OF CLUTCH PULLEY

2 CHECK LOCK OF CLUTCH PULLEY

(a) Start the engine and visually check for looseness of the clutch pulley.

OK: The clutch pulley is not loose.

REPLACE GENERATOR ASSEMBLY

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.