Theft deterrent

Customize parameters

~1min read

HINT: The following items can be customized.

NOTICE:

  • After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  • Be sure to record the current settings before customization.
  • When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).

THEFT DETERRENT SYSTEM

DISPLAY (ITEM)

DEFAULT

CONTENTS

SETTING

PASSIVE MODE (Passive Arming Mode

OFF

PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is removed from ignition key cylinder and driver side door is closed, even if doors are not locked by wireless or door key lock operation In PASSIVE MODE, if you do not perform following operations within 14 seconds after door is opened during armed state, theft deterrent system will judge that condition as a theft and switch to alarm sounding state
  • Unlock any door by wireless operation
  • Reconnect battery
  • Insert key into ignition key cylinder and turn ignition switch from OFF to ON
  • Unlock any door by key operation

ON/OFF

WARN BY HORN (Warning by horn)

ON

Function that makes vehicle horn and theft deterrent horn be able to be used as a warning device

ON/OFF

ENTRY DELAY (Entry delay time)

14 s

Function that changes entry delay time (time before warning starts) for PASSIVE MODE

0 s/14 s/30 s

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.