Toyota Sienna Quiz
Meter

Engine oil pressure switch

In this manual: Meter
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
2steps
~12min
1/5difficulty
Done 0 of 2

ON-VEHICLE INSPECTION

1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

  1. Disconnect the connector from the oil pressure switch assembly.
  2. With the switch still installed, measure the resistance between the terminal of the engine oil pressure switch and engine ground.

Standard Resistance:

Engine stopped: Below 1 Ω
Engine idling: 10 kΩ or higher

HINT: If the value is not as specified, replace the engine oil pressure switch.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.