Toyota Sienna Quiz
Engine

Fuel pump resistor

In this manual: Engine
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

Components

Components

REMOVAL

1. REMOVE FUEL PUMP RESISTOR

REMOVE FUEL PUMP RESISTOR

(a) Disconnect the connector.

(b) Remove the nut and fuel pump resistor.

INSPECTION

1. INSPECT FUEL PUMP RESISTOR

INSPECT FUEL PUMP RESISTOR

(a) Inspect fuel pump resistor.

(1) Using an ohmmeter, measure the resistance between the terminals.

Standard resistance

INSTALLATION

1. INSTALL FUEL PUMP RESISTOR

INSTALL FUEL PUMP RESISTOR

(a) Install the fuel pump resistor with nut.

Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) (b) Connect the connector.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.