Toyota Sienna Quiz
Horn

High pitched horn

In this manual: Horn
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
2steps
~12min
1/5difficulty
Done 0 of 2

COMPONENTS

COMPONENTS

REMOVAL

1. REMOVE FRONT BUMPER COVER

2. REMOVE HIGH PITCHED HORN

  1. Disconnect the connector.
  2. Remove the bolt and horn.

INSPECTION

1. INSPECT HIGH PITCHED HORN

INSPECT HIGH PITCHED HORN
  1. Apply battery voltage and check operation of the horn, as shown in the table.

Standard

Standard

INSTALLATION

1. INSTALL HIGH PITCHED HORN

INSTALL HIGH PITCHED HORN
  1. Install the high pitched horn with the bolt.
Torque: 20 N*m (199 kgf*cm, 15 ft.*lbf)
  • Connect the connector.

    • 2. INSTALL FRONT BUMPER COVER

    Test yourself

    A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.