Toyota Sienna Quiz
Mirror

Inner rear view mirror

In this manual: Mirror
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
8steps
~48min
2/5difficulty
Done 0 of 8

COMPONENTS

COMPONENTS

REMOVAL

1. REMOVE INNER REAR VIEW MIRROR ASSEMBLY

REMOVE INNER REAR VIEW MIRROR ASSEMBLY
  1. w/ EC mirror: Remove the inner rear view mirror cover.
  2. w/ EC mirror: Disconnect the connector.
  3. Remove the screw.
  4. Remove the inner rear view mirror assembly as shown in the illustration.

INSPECTION

1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY

INSPECT INNER REAR VIEW MIRROR ASSEMBLY
  1. Inspect operation of the electrochromic inner mirror.
  2. Connect the positive (+) lead from the battery to terminal 1 and connect the negative (-) lead to terminal 2.
  3. Attach black colored tape to the forward sensor to prevent it from sensing.
  4. Light up the mirror with an electric light and check that the mirror surface changes from bright to dark.

Standard: Mirror surface changes from bright to dark

If the result is not as specified, replace the mirror assembly.

INSTALLATION

1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.