Toyota Sienna Quiz
Tire and wheel

Installation

In this manual: Tire and wheel
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY

INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY

(a) Connect the connector.

(b) Install the tire pressure warning receiver assembly with the bolt.

INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY

Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)

2. INSTALL ROOF HEADLINING ASSEMBLY

HINT: Refer to the instructions for INSTALLATION of the ROOF HEADLINING (See page IR-14).

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT: See page TW-25.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.