Toyota Sienna Quiz
Seat belt

Installation

In this manual: Seat belt
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for 8-Passenger)

HINT: Refer to the instructions for reassembly of the rear No. 1 seat assembly (for center seat).

  1. Install the rear seat 3 point type belt assembly with the bolt.

    Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)

2. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for 7-Passenger)

HINT: Refer to the instructions for reassembly of the rear No. 1 seat assembly (for captain seat type).

  1. Install the rear seat 3 point type belt assembly with the bolt.

    Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)

3. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY

HINT:

  • Refer to the instructions for reassembly of the rear No. 2 seat assembly (for power seat type RH side).
  • Refer to the instructions for reassembly of the rear No. 2 seat assembly (for manual seat type RH side).
  1. Install the rear seat 3 point type belt assembly with the bolt.

    Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)

4. INSTALL REAR SEAT INNER BELT ASSEMBLY

HINT:

  • Refer to the instructions for reassembly of the rear No. 2 seat assembly (for power seat type LH side).
  • Refer to the instructions for reassembly of the rear No. 2 seat assembly (for manual seat type LH side).
  1. Install the rear seat inner belt assembly with the bolt.

    Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.