Installation

1. INSTALL INSTRUMENT PANEL SAFETY PAD SUBASSEMBLY

1. Using a torque wrench, install the bolt <B>.

Torque: 20 N*m (204 kgf*cm, 14 ft.*lbf)

2. INSTALL SHIFT LEVER ASSEMBLY

1. Using a torque wrench, install the 4 bolts.

   Torque: 21 N*m (214 kgf*cm, 12.6 ft.*lbf)

3. INSTALL DEFROSTER NOZZLE OPENING PLATE NO.1

4. INSTALL FRONT NO.2 SPEAKER ASSEMBLY

5. INSTALL FRONT NO.1 SPEAKER ASSEMBLY

6. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY NO.2

7. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

8. INSTALL FRONT PILLAR GARNISH RH

9. INSTALL FRONT PILLAR GARNISH LH

10. INSTALL INTEGRATION CONTROL & PANEL ASSEMBLY

11. INSTALL RADIO RECEIVER ASSEMBLY

12. INSTALL STEREO COMPONENT SPEAKER ASSEMBLY

13. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH

14. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER

15. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER

16. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING ASSEMBLY

17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

18. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER NO.2

19. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER NO.1

20. INSTALL FLOOR CARPET COVER CENTER RH

21. INSTALL FLOOR CARPET COVER CENTER LH

22. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY NO.3

23. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY NO.1

24. INSTALL INSTRUMENT SIDE PANEL RH

25. INSTALL INSTRUMENT SIDE PANEL LH

26. INSTALL INSTRUMENT PANEL BOX NO.2

27. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

28. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

29. INSTALL INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY NO.1

30. INSTALL INSTRUMENT PANEL FINISH PANEL SUBASSEMBLY LOWER LH

31. INSTALL COWL SIDE TRIM BOARD RH

32. INSTALL COWL SIDE TRIM BOARD LH

33. INSTALL FRONT DOOR SCUFF PLATE RH

34. INSTALL FRONT DOOR SCUFF PLATE LH

35. INSTALL COMBINATION METER ASSEMBLY

36. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

37. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

38. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

39. INSTALL SPIRAL CABLE SUB-ASSEMBLY

40. INSTALL STEERING COLUMN COVER

41. ADJUST SPIRAL CABLE SUB-ASSEMBLY

42. INSTALL STEERING WHEEL ASSEMBLY

43. INSTALL HORN BUTTON ASSEMBLY

44. INSTALL STEERING WHEEL COVER LOWER NO.2

45. INSTALL STEERING WHEEL COVER LOWER NO.3

46. CONNECT BATTERY NEGATIVE TERMINAL

47. INSPECT HORN BUTTON ASSEMBLY

48. INSPECT SRS WARNING LIGHT