Exterior
Installation
In this manual: Exterior
6steps
~36min
2/5difficulty
Done 0 of 6
1. INSTALL FRONT DOOR WINDOW FRAME MOULDING

- Remove the tape from the front door window frame moulding.
- Clean the contact surface of the vehicle body with white gasoline.
- Clean the outer circumference of the front door window frame moulding with white gasoline.
- Apply new double-sided tape to the front door window frame moulding, as shown in the illustration.
Dimensions:

- Using a heat light, heat the vehicle body and front door window frame moulding.
Heating temperature:

NOTICE: Do not heat the body and front door window frame moulding excessively.
- Remove the peeling paper from the face of the front door window frame moulding face.
HINT: Be careful that dirt or foreign objects do not stick to the adhesive part when removing the peeling paper.
- Engage the 2 claws and install the front door window frame moulding with the screw.
NOTICE: Do not apply excessive force onto the front door window frame moulding, but steady pressure with your thumbs.
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?