Toyota Sienna Quiz
Exterior

Installation

In this manual: Exterior
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
12steps
~72min
3/5difficulty
Done 0 of 12

1. INSTALL REAR DOOR WINDOW FRAME MOULDING

INSTALL REAR DOOR WINDOW FRAME MOULDING
  1. Remove the tape from the rear door window frame moulding.
  2. Clean the contact surface of the vehicle body with white gasoline.
  3. Clean the outer circumference of the rear door window frame moulding with white gasoline.
  4. Apply new double-sided tape to the rear door window frame moulding, as shown in the illustration.

Dimensions:

Dimensions
  1. Using a heat light, heat the vehicle body and rear door window frame moulding.

Heating temperature:

Heating temperature

NOTICE: Do not heat the body and rear door window frame moulding excessively.

  1. Remove the peeling paper from the face of the rear door window frame moulding face.

    HINT: Be careful that dirt or foreign objects do not stick to the adhesive part when removing the peeling paper.

  2. Engage the 2 claws and install the rear door window frame moulding with the screw.

NOTICE: Do not apply excessive force onto the rear door window frame moulding, but steady pressure with your thumbs.

2. INSTALL REAR DOOR WINDOW REAR FRAME MOULDING

  1. Remove the tape from the rear door window rear frame moulding.
  2. Clean the contact surface of the vehicle body with white gasoline.
  3. Clean the outer circumference of the rear door window rear frame moulding with white gasoline.
    INSTALL REAR DOOR WINDOW REAR FRAME MOULDING
  4. Apply new double-sided tape to the rear door window rear frame moulding, as shown in the illustration.

Dimensions:

Dimensions
  1. Using a heat light, heat the vehicle body and rear door window rear frame moulding.

Heating temperature:

Heating temperature

NOTICE: Do not heat the body and rear door window rear frame moulding excessively.

  1. Remove the peeling paper from the face of the rear door window rear frame moulding face.

    HINT: Be careful that dirt or foreign objects do not stick to the adhesive part when removing the peeling paper.

  2. Engage the 2 claws and install the rear door window rear frame moulding with the screw.

NOTICE: Do not apply excessive force onto the rear door window rear frame moulding, but steady pressure with your thumbs.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.