Toyota Sienna Quiz
Interior

Installation

In this manual: Interior
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
7steps
~42min
2/5difficulty
Done 0 of 7

1. INSTALL ROOF HEADLINING ASSEMBLY

INSTALL ROOF HEADLINING ASSEMBLY
  1. w/ sliding roof: Install the roof headlining with the 5 clips.
  2. w/o sliding roof: Install the roof headlining with the 3 clips.

NOTICE: In order to prevent the roof headlining from becoming bent, work must be performed by 2 or more persons when removing/installing it.

2. INSTALL ROOF CONSOLE BOX

INSTALL ROOF CONSOLE BOX
  1. Temporarily install the 2 screws to the retainer.
  2. Set the console box, as shown in the illustration.
  3. Slide the console box in the direction indicated by the arrow mark in the illustration so that the screws can meet the keyholes.
  4. Tighten the 2 screws.
  5. Tighten the 2 torx screws.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.