Toyota Sienna Quiz
Engine

Installation

In this manual: Engine
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSTALL CHARCOAL CANISTER ASSEMBLY

INSTALL CHARCOAL CANISTER ASSEMBLY

(a) Install the 3 bolts and charcoal canister.

Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf) (b) Connect the purge line hose to the charcoal canister.

(c) Connect the wire harness clamp.

(d) Connect the vapor pressure sensor connector.

(e) Connect the charcoal canister filter sub-assembly to the charcoal canister.

(f) Connect the fuel tank vent hose to the charcoal canister.

2. INSTALL CHARCOAL CANISTER PROTECTOR

(a) Install the 6 bolts and charcoal canister protector.

Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.