Toyota Sienna Quiz
U151e automatic transaxle

Installation

In this manual: U151e automatic transaxle
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. Install speed sensor (nc sensor)

Install speed sensor (nc sensor)

(a) Coat the O-ring with ATF.

(b) Install the speed sensor with the bolt.

Torque: 11 N*m (115 kgf*cm, 8 ft.*lbf)

HINT: Make sure to install the same manufacturer's sensor.

(c) Connect the speed sensor connector.

2. INSTALL SPEED SENSOR (NT SENSOR)

INSTALL SPEED SENSOR (NT SENSOR)

(a) Coat the O-ring with ATF.

(b) Install the speed sensor with the bolt.

Torque: 11 N*m (115 kgf*cm, 8 ft.*lbf)

HINT: Make sure to install the same manufacturer's sensor.

(c) Connect the speed sensor connector.

3. INSTALL AIR CLEANER ASSEMBLY

HINT: (See page EM-44)

4. INSTALL BATTERY

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.