Supplemental restraint system

On-vehicle inspection

2steps
~12min
1/5difficulty
Done 0 of 2

1. INSPECT OCCUPANT CLASSIFICATION ECU (VEHICLE NOT INVOLVED IN COLLISION)

  1. Perform a diagnostic system check.

2. INSPECT OCCUPANT CLASSIFICATION ECU (VEHICLE INVOLVED IN COLLISION)

  1. Perform a diagnostic system check.
  2. Even if the airbag was not deployed, check if there is any damage to the occupant classification ECU. If there are any defects as mentioned below, replace the occupant classification ECU with a new one:
  • Cracks, dents or chips on the case.
  • Cracks or other damage to the connector.

CAUTION: Be sure to follow the correct removal and installation procedures.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.