Introduction
Problem symptoms table
In this manual: Introduction
~1min read
When a "Normal" code is output during a DTC check but the problem still occurs, use the Problem Symptoms Table. The suspected areas (circuits or parts) for each problem symptoms are in the table. The suspected areas are listed in order of probability. A description of each of the chart's columns is shown in the table below.
HINT:
In some cases, the problem is not detected by the diagnostic system even though a problem symptom occurs. It is possible that the problem is occurring outside the detection range of the diagnostic system, or that the problem occurs in a completely different system.
| Item | Description |
| Problem Symptom | - |
| Circuit Inspection, Inspection Order | Indicates the order in which the circuits need to be checked |
| Circuit or Part Name | Indicates the circuit or part which needs to be checked |
| See Page | Indicates the page where the flowchart for each circuit is located |
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?