Removal

1. REMOVE FRONT EXHAUST PIPE ASSEMBLY

HINT: (See page EX-8)

2. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

HINT: (See page PR-3)

3. REMOVE REAR DIFFERENTIAL FILLER PLUG

(a) Using a hexagon wrench (10 mm), remove the filler plug and gasket.

4. REMOVE REAR DIFFERENTIAL DRAIN PLUG

(a) Using a hexagon wrench (10 mm), remove the drain plug and gasket, and drain the oil.

5. REMOVE REAR DRIVE PINION NUT

(a) Using a chisel and a hammer, unstake the staked part of the nut.

(b) Using SST to hold the flange, remove the nut.

SST 09330-00021

6. REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY

(a) Using SST, remove the companion flange.

SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020)

7. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL

(a) Using SST, remove the oil seal.

SST 09308-10010

8. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

9. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING

(a) Using SST, remove the front tapered roller bearing.

SST 09556-22010

10. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER