Toyota Sienna Quiz
Brake control

Removal

In this manual: Brake control
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read
1special tools

1. DRAIN BRAKE FLUID

NOTICE: Wash brake fluid off immediately if it adheres to any painted surface.

2. DISCONNECT BATTERY NEGATIVE TERMINAL

3. REMOVE AIR CLEANER ASSEMBLY WITH HOSE

4. REMOVE BRAKE ACTUATOR WITH BRACKET

REMOVE BRAKE ACTUATOR WITH BRACKET

(a) Release the latch of the brake actuator connector to disconnect the connector.

(b) Using SST, disconnect the 6 brake tubes from the actuator with bracket.

SST 09023-00101

REMOVE BRAKE ACTUATOR WITH BRACKET

(c) Use tags or make a memo to identify the places to reconnect.

(d) Remove the 3 bolts and the actuator with bracket.

NOTICE: Be careful not to damage the brake tubes and wire harness.

5. REMOVE BRAKE ACTUATOR

(a) Remove the 2 nuts and the brake actuator assembly from the brake actuator bracket.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.