Exterior

Removal

3steps
~18min
2/5difficulty
Done 0 of 3

1. REMOVE BACK DOOR CENTER GARNISH (See page ET-18)

2. REMOVE POWER BACK DOOR ROD (See page ED- 220)

3. REMOVE BACK DOOR LH SIDE GARNISH

4. REMOVE BACK DOOR RH SIDE GARNISH

5. REMOVE BACK DOOR PULL STRAP (See page ED- 221)

6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

7. REMOVE LH BACK-UP LIGHT ASSEMBLY (See page LI-90)

8. REMOVE RH BACK-UP LIGHT ASSEMBLY (See page LI-90)

9. REMOVE BACK DOOR OUTSIDE GARNISH

  1. Disconnect the licence light connector.
  2. Remove the 5 nuts, clip and back door outside garnish sub-assembly.
    REMOVE BACK DOOR OUTSIDE GARNISH
  3. Remove the 2 screws and back door outside opener switch.
    REMOVE BACK DOOR OUTSIDE GARNISH

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.