Toyota Sienna Quiz
Engine

Removal

In this manual: Engine
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. Disconnect cable from negative battery terminal

2. REMOVE STEERING COLUMN COVER LOWER

REMOVE STEERING COLUMN COVER LOWER

(A) insert the key into the ignition key cylinder and release the steering lock.

(B) turn the steering wheel clockwise to gain access to the screw and remove the screw.

REMOVE STEERING COLUMN COVER LOWER

(c) Turn the steering wheel counterclockwise to gain access to the screw and remove the screw.

(d) Detach the 4 claws, and remove the steering column cover lower.

3. REMOVE IGNITION SWITCH ASSEMBLY

REMOVE IGNITION SWITCH ASSEMBLY

(a) Disconnect the ignition switch connector.

(b) Remove the 2 screws and ignition switch.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.