Removal

1. DISCONNECT BATTERY NEGATIVE TERMINAL 2. REMOVE FRONT DOOR SCUFF PLATE LH HINT: (See page IP-6) 3. REMOVE FRONT DOOR SCUFF PLATE RH HINT: (See page IP-6) 4. REMOVE COWL SIDE TRIM BOARD LH HINT: (See page IP-6) 5. REMOVE COWL SIDE TRIM BOARD RH HINT: (See page IP-6) 6. REMOVE INSTRUMENT PANEL FINISH PANEL SUBASSEMBLY LOWER LH HINT: (See page IP-6) 7. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY HINT: (See page IP-7) 8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY HINT: (See page IP-7) 9. REMOVE FLOOR CARPET COVER CENTER LH HINT: (See page IP-8) 10. REMOVE FLOOR CARPET COVER CENTER RH HINT: (See page IP-8) 11. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER NO.1 HINT: (See page IP-8) 12. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER NO.2 HINT: (See page IP-8)

13. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

(a) Remove the floor shift lever knob sub-assembly.

14. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

(a) Using a screwdriver, remove the position indicator housing assembly from the instrument cluster finish panel assembly center.

15. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER

HINT: (See page IP-9)

16. REMOVE SHIFT LEVER CAP

(a) Using a small screwdriver, remove the shift lever cap from the position indicator housing assembly.

17. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER

HINT: (See page IP-9)

18. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Using a screwdriver, disconnect the cable end from the shift lever assembly.

(b) Using a small screwdriver, disconnect the outer of transmission control cable assembly from the shift lever assembly.

19. REMOVE SHIFT LEVER ASSEMBLY

(a) Disconnect the 2 connectors.

(b) Remove the 4 bolts and disconnect the shift lever assembly from the vehicle.