Toyota Sienna Quiz
Air conditioning

Room temperature sensor (for rear air conditioning system)

In this manual: Air conditioning
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

ON-VEHICLE INSPECTION

1. INSPECT REAR A/C ROOM TEMPERATURE SENSOR

INSPECT REAR A/C ROOM TEMPERATURE SENSOR

(a) Remove the rear A/C room temperature sensor.

(b) Disconnect the connector from the rear A/C room temperature sensor.

(c) Measure the resistance according to the value(s) in the table below.

Standard resistance

NOTICE:

  • Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor
  • When measuring, the sensor temperature must be the same as the ambient temperature.

HINT: As the temperature increases, the resistance decreases (see the graph).

If the resistance is not as specified, replace the rear A/C room temperature sensor.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.