Tire and wheel
Terminals of ecu
In this manual: Tire and wheel
~1min read
Check tire pressure warning ecu
HINT: Inspect the connectors from the back side while the connectors are connected.

(a) Disconnect the tire pressure warning antenna and receiver connector.
(b) Measure the voltage according to the value(s) in the table below.

(c) Connect the tire pressure warning antenna and receiver connector.
(d) Measure the voltage and resistance according to the value(s) in the table below. If the result is not as specified, the ECU may have a malfunction.

(e) Using an oscilloscope, check the waveform 1.
(1) Waveform 1 (Reference)

(2) Waveform 2 (Reference)
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?