Third outside seats

- To use
Pull the head restraints up. - To fold
Press the button
Removing the head restraints
- Front and second outside seats
Pull the head restraint up while pressing the lock release button.

- Second center* and third center seats
Pull the head restraint up while pressing the lock release button.
*: 8-passenger models only

- Third outside seats
The head restraint cannot be removed.
Installing the head restraints
- Front and second outside seats

Align the head restraint with the installation holes and push it down to the lock position.
Press and hold the lock release button when lowering the head restraint.
- Second center* and third center seats

Align the head restraint with the installation holes and push it down to the lock position.
Press and hold the lock release button when lowering the head restraint.
*: 8-passenger models only
Adjusting the height of the head restraints

Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Adjusting the center seat head restraints
Always raise the head restraint one level from the stowed position when using.
WARNINGHead restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
- Use the head restraints designed for each respective seat.
- Adjust the head restraints to the correct position at all times.
- After adjusting the head restraints, push down on them and make sure they are locked in position.
- Do not drive with the head restraints removed.
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.