Adjustable components (seats, mirrors, steering wheel)
Related Tacoma materials
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT REAR AIRBAG SENSOR (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check (See page ). 2. INSPECT REAR AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag has not Deployed) CAUTION: For rear airbag sensor removal and ...
Terminals Of Ecu
TERMINALS OF ECU 1. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Disconnect the 1D and 1F driver side junction block connectors. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connectors ...
Inspection
INSPECTION PROCEDURE 1. INSPECT CLUTCH DISC ASSEMBLY NOTICE: When replacing the clutch disc assembly, make sure to perform an inspection of the flywheel sub-assembly and clutch cover assembly. (a) Using a vernier caliper, measure the rivet depth. Minimum rivet depth: 0.3 mm ...
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.