Maintenance
Body
In this manual: Maintenance
~1min read
General Maintenance GENERAL MAINTENANCE PROCEDURE
1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
(a) Tighten the bolts and nuts on the chassis parts listed below, if necessary.
- Front axle and suspension
- Drive train
- Rear axle and suspension
- Brake system
- Engine mounting
- Other chassis parts
(b) Tighten the bolts and nuts on the body parts listed below, if necessary.
- Seat belt system
- Seats
- Doors and hood
- Body mountings
- Fuel tank
- Exhaust pipe system
- Other body parts
2. CLEAN OR REPLACE AIR CONDITIONING FILTER
(a) Remove the glove compartment assembly.
(b) Remove the air filter case.
(c) Remove the air conditioning filter.
(d) Visually inspect the surface of the air conditioning filter.
(e) If the air conditioning filter is contaminated with foreign matter, clean or replace it according to the maintenance schedule.
NOTICE:
Some filters are not able to be cleaned.
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?