Toyota Tacoma Quiz
Interior Panel

Disassembly

In this manual: Interior Panel
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~2min read
DISASSEMBLY PROCEDURE

1. REMOVE NO. 1 HEATER TO REGISTER DUCT

(a) Remove the 2 screws <F> and screw <D>.

(b) Disengage the 2 guides to remove the No. 1 heater to register duct.

2. REMOVE NO. 3 HEATER TO REGISTER DUCT

(a) Remove the 2 screws <F> and screw <D>.

(b) Disengage the 2 guides to remove the No. 3 heater to register duct.

3. REMOVE NO. 2 HEATER TO REGISTER DUCT

(a) Remove the 2 screws <F> and screw <D>.

(b) Disengage the 2 guides to remove the No. 2 heater to register duct.

4. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT

(a) Remove the 2 screws <F>.

(b) Disengage the 2 guides.

(c) Disengage the 2 claws to remove the side No. 1 defroster nozzle duct.

5. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT

(a) Remove the 2 screws <F>.

(b) Disengage the 2 guides.

(c) Disengage the 2 claws to remove the side No. 2 defroster nozzle duct.

6. REMOVE DEFROSTER NOZZLE ASSEMBLY

(a) Remove the 3 screws <F>.

(b) Disengage the 3 guides to remove the defroster nozzle assembly.

7. REMOVE NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY

(a) Disengage the 6 claws and 3 guides to remove the No. 1 instrument panel register sub-assembly.

8. REMOVE NETWORK GATEWAY ECU

9. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

9. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

10. REMOVE ANTENNA CORD SUB-ASSEMBLY

10. REMOVE ANTENNA CORD SUB-ASSEMBLY

11. REMOVE INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

11. REMOVE INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

12. REMOVE NO. 1 INSTRUMENT PANEL PIN

12. REMOVE NO. 1 INSTRUMENT PANEL PIN

HINT:

Use the same procedure as for the opposite side.

(a) Remove the screw <F>.

(b) Disengage the guide to remove the No. 1 instrument panel pin.

13. REMOVE NO. 1 METER HOOD RETAINER

HINT:

Use the same procedure as for the opposite side.

(a) Remove the screw <D>.

(b) Disengage the guide to remove the No. 1 meter hood retainer.

14. REMOVE NO. 1 INSTRUMENT PANEL CUSHION

(a) Remove the No. 1 instrument panel cushion.

15. REMOVE NO. 2 INSTRUMENT PANEL CUSHION

(a) Remove the No. 2 instrument panel cushion.

16. REMOVE NO. 4 INSTRUMENT PANEL CUSHION

(a) Remove the No. 4 instrument panel cushion.

17. REMOVE INSTRUMENT PANEL CUSHION

(a) Remove the instrument panel cushion.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.