Disassembly

1. REMOVE ROOM LIGHT BRACKET

(a) Disengage the guide to remove the room light bracket.

2. REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

(a) Remove the 2 bolts and sliding roof drive gear sub-assembly.

3. REMOVE SUNSHADE TRIM SUB-ASSEMBLY

(a) Remove the screw.

(b) Disengage the claw and 2 guides to remove the sliding roof drain hose joint LH as shown in the illustration.

(c) Remove the screw.

(d) Disengage the claw and 2 guides to remove the sliding roof drain hose joint RH as shown in the illustration.

(e) Slide and remove the sunshade trim sub-assembly as shown in the illustration.

4. REMOVE ROOF DRIP CHANNEL

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws. Text in Illustration *a Protective Tape

(b) Slide and remove the roof drip channel as shown in the illustration.

5. REMOVE SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY LH

NOTICE:

Do not disassemble the sliding roof drive cable sub-assembly except when replacing it.

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the sliding roof guide block. Text in Illustration *a Protective Tape

(b) Remove the sliding roof drive cable sub-assembly LH.

6. REMOVE SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.