Toyota Tacoma Quiz
Propeller Shaft

Inspection

In this manual: Propeller Shaft
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
INSPECTION PROCEDURE

1. INSPECT PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

(a) Using a dial indicator, check the propeller shaft with center bearing assembly

(a) Using a dial indicator, check the propeller shaft with center bearing assembly runout.

Maximum runout:

0.6 mm (0.0236 in.)

If the propeller shaft with center bearing assembly runout is greater than the maximum, replace the propeller shaft with center bearing assembly.

2. INSPECT PROPELLER SHAFT

(a) Using a dial indicator, check the propeller shaft runout.

(a) Using a dial indicator, check the propeller shaft runout.

Maximum runout:

0.6 mm (0.0236 in.)

If the propeller shaft runout is greater than the maximum, replace the propeller shaft.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.