Installation

1. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

(a) Install the rear seatback hinge sub-assembly with the 2 bolts.

Torque:

30 N·m {306 kgf·cm, 22 ft·lbf}

2. INSTALL REAR SEATBACK ASSEMBLY

(a) Install the rear seatback assembly with the 2 bolts.

Torque:

37 N·m {377 kgf·cm, 27 ft·lbf}

(b) Connect the rear seat inner belt assembly and rear center seat outer belt assembly by installing the floor anchor with the bolt. Text in Illustration *a Protruding Part *b 40° Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Make sure that the rear seat inner belt assembly and rear center seat outer belt assembly is oriented in the correct direction when installing. Do not allow the anchor part of the rear seat inner belt assembly and rear center seat outer belt assembly to overlap the protruding part of the floor panel.

3. INSTALL REAR SEATBACK HINGE COVER

(a) Engage the 6 claws to install the 2 rear seatback hinge covers.

4. INSTALL REAR SEAT CUSHION ASSEMBLY

(a) Install the rear seat cushion with the 2 bolts.

Torque:

37 N·m {377 kgf·cm, 27 ft·lbf}