Installation
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Insert the 5 hooks, install 6 new bolts, 2 new clips with pins and 2 new spacers to install the curtain shield airbag assembly.
Text in Illustration *1 |
Clip |
*2 |
Spacer |
*a |
Pin |
*b |
Hook |
Torque:
12,5 N·m {127 kgf·cm, 9 ft·lbf}
NOTICE:
Do not twist the curtain shield airbag assembly.
(b) Connect the connector NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness. |
 |
(c) Push in the airbag connector lock to install the airbag connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
Click here .gif)
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5,4 N·m {55 kgf·cm, 48 in·lbf}
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click here
4. INSPECT SRS WARNING LIGHT
Click here
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.