Installation

1. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY WITHOUT DOOR

(a) Engage the 3 hooks (B). Text in Illustration *a Hooks (A) *b Hooks (B)

(b) Engage the 3 hooks (A) to install the instrument panel passenger airbag assembly without door on the instrument panel.

(c) Install the 2 screws.

2. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY

(a) Engage the 2 clamps to install the instrument panel wire assembly.

(b) Connect the 3 airbag connectors. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

(c) Push in the 3 airbag connector locks to install the 3 airbag connectors.

3. INSTALL NO.3 HEATER TO REGISTER DUCT

4. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

5. INSPECT SRS WARNING LIGHT

(See page )