Installation

1. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Connect the airbag connector. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Push in the airbag connector lock to install the airbag connector.

(c) Install the lower No. 2 instrument panel airbag assembly with the 3 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. INSTALL GLOVE COMPARTMENT PLATE

3. INSTALL INSTRUMENT SIDE PANEL RH

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

5. INSPECT SRS WARNING LIGHT

Click here