Propeller Shaft

Removal

~1min read
REMOVAL PROCEDURE

1. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (for 2GR-FKS)

2. REMOVE PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY 2. REMOVE PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY

2. REMOVE PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY

(a) Remove the 2 bolts and propeller shaft heat insulator bracket.

(a) Remove the 2 bolts and propeller shaft heat insulator bracket.

3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

(a) Place matchmarks on the propeller shaft flange and differential flange.

(a) Place matchmarks on the propeller shaft flange and differential flange.

Text in Illustration

*a

Matchmark

(b) Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.

(c) Place matchmarks on the propeller shaft flange and transfer flange.

Text in Illustration

*a

Matchmark

(d) Remove the 4 nuts, 4 washers and front propeller shaft.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.