Removal

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

4. REMOVE FAN AND GENERATOR V BELT

Click here

5. DRAIN POWER STEERING FLUID

6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY

(a) Disengage the clip and disconnect the return hose.

(b) Remove the union bolt, then disconnect the pressure feed tube.

(c) Remove the gasket from the pressure feed tube.

7. REMOVE VANE PUMP

(a) Disconnect the oil pressure switch connector.

(b) Remove the 2 bolts and vane pump assembly.