Side Moulding

Components COMPONENTS ILLUSTRATION ILLUSTRATION Removal REMOVAL CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.
• When removing the lower No. 2 side panel moulding, heat the vehicle body and lower No. 2 side panel moulding using a heat light.

Heating Temperature

Item	Temperature
Vehicle Body	40 to 60 °C
Lower No. 2 Side Panel Moulding	20 to 30 °C

NOTICE:

Do not heat the vehicle body or lower No. 2 side panel moulding excessively.

PROCEDURE

1. REMOVE LOWER NO. 2 SIDE PANEL MOULDING (w/ Over Fender)

(a) Using a heat light, heat the lower No. 2 side panel moulding.

(b) Remove the screw. Text in Illustration *a Double-sided Tape

(c) Disengage the 2 claws, and peel off the double-sided tape to remove the lower No. 2 side panel moulding.

2. REMOVE LOWER NO. 2 SIDE PANEL MOULDING (w/o Over Fender)

(a) Using a heat light, heat the lower No. 2 side panel moulding.

(b) Remove the 2 screws. Text in Illustration *a Double-sided Tape

(c) Disengage the 2 claws, and peel off the double-sided tape to remove the lower No. 2 side panel moulding.

Installation INSTALLATION CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.
• When installing the lower No. 2 side panel moulding, heat the vehicle body and lower No. 2 side panel moulding using a heat light.

PROCEDURE

1. INSTALL LOWER NO. 2 SIDE PANEL MOULDING (w/ Over Fender)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Clean off any tape adhesive residue with cleaner.

(b) Install a new lower No. 2 side panel moulding.

(1) Using a heat light, heat the vehicle body and a new lower No. 2 side panel moulding.

(2) Remove the release paper from the lower No. 2 side panel moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Engage the claws to install the lower No. 2 side panel moulding. Text in Illustration *a Double-sided Tape

(4) Install the screw.

2. INSTALL LOWER NO. 2 SIDE PANEL MOULDING (w/o Over Fender)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Clean off any tape adhesive residue with cleaner.

(b) Install a new lower No. 2 side panel moulding.

(1) Using a heat light, heat the vehicle body and a new lower No. 2 side panel moulding.

(2) Remove the release paper from the lower No. 2 side panel moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Engage the claws to install the lower No. 2 side panel moulding. Text in Illustration *a Double-sided Tape

(4) Install the 2 screws.