2gr-fks Starting

Starter Relay

~1min read
Inspection INSPECTION PROCEDURE

1. INSPECT STARTER RELAY

(a) Check the resistance.

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Connection

Specified Condition

3 - 5

Battery voltage not applied to terminals 1 and 2

10 kΩ or higher

3 - 5

Battery voltage applied to terminals 1 and 2

Below 1 Ω

If the result is not as specified, replace the starter relay.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.