Checking and replacing fuses
| If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary.
1. Turn the engine switch off. 2. Open the fuse box cover. Engine compartment Push the tab in and lift the cover off. ![]() Under the instrument panel Remove the cover. ![]() 3. Remove the fuse with the pullout tool. Only type A fuse can be removed using the pullout tool. ![]() 4. Check if the fuse is blown.
Type A and B: Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box cover. Type C: Contact your Toyota dealer. Type A ![]() Type B ![]() Type C ![]() ■After a fuse is replaced
■If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage. WARNING■To prevent system breakdowns and vehicle fire Observe the following precautions. Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
■Before replacing fuses Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible. |





