ReplacementREPLACEMENT
PROCEDURE
1. DRAIN DIFFERENTIAL OIL
(a) Stop the vehicle on a level place.
(b) for Front Differential:
(1) Using a 10 mm hexagon wrench, remove the filler plug and gasket.
(2) Using a 10 mm hexagon wrench, remove the drain plug and gasket, and drain the oil.
(3) Using a 10 mm hexagon wrench, install a new gasket and the drain plug.
Torque:
39 N·m {400 kgf·cm, 29 ft·lbf}
(c) for Rear Differential:
(1) Remove the filler plug and gasket.
(2) Remove the drain plug and gasket, and drain the oil.
(3) Install a new gasket and the drain plug.
Torque:
49 N·m {500 kgf·cm, 36 ft·lbf}
2. ADD DIFFERENTIAL OIL
(a) Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole. Text in Illustration
*a |
0 to 5 mm (0 to 0.196 in.) |
NOTICE:
- Too much or too little oil will lead to differential problems.
- After changing the oil, drive the vehicle and then check the oil level again.
Oil type:
Item | Oil type and viscosity |
Front differential |
Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent. |
Rear differential |
Front differential capacity:
Specified Condition | |
2.00 to 2.10 liters (2.12 to 2.21 US qts., 1.76 to 1.84 Imp. qts.) |
|
Rear differential capacity:
Engine type | Wheelbase type | Cab type | Drive type | Specified Condition |
3UR-FE. 3UR-FBE |
3700 mm (12 ft. 1.7 in.) |
Double |
2WD |
3.55 to 3.65 liters (3.76 to 3.85 US qts., 3.13 to 3.21 Imp. qts.) |
4WD |
CrewMax |
2WD |
3.70 to 3.80 liters (3.91 to 4.01 US qts., 3.26 to 3.34 Imp. qts.) |
4WD |
3.55 to 3.65 liters (3.76 to 3.85 US qts., 3.13 to 3.21 Imp. qts.) |
4180 mm (13 ft. 8.6 in.) |
Double |
2WD |
3.70 to 3.80 liters (3.91 to 4.01 US qts., 3.26 to 3.34 Imp. qts.) |
4WD |
1UR-FE |
3700 mm (12 ft. 1.7 in.) |
ALL |
2WD |
4.55 to 4.65 liters (4.81 to 4.91 US qts., 4.01 to 4.09 Imp. qts.) |
4WD |
|
 |
(b) for Rear Differential:
(1) Install a new gasket and the filler plug.
Torque:
49 N·m {500 kgf·cm, 36 ft·lbf}
(c) for Front Differential:
(1) Using a 10 mm hexagon wrench, install a new gasket and the filler plug.
Torque:
39 N·m {400 kgf·cm, 29 ft·lbf} |