DISASSEMBLY
PROCEDURE
1. FIX VANE PUMP ASSEMBLY
(a) Using SST, hold the vane pump in a vise.
SST: 09630-00014
09631-00132 |
 |
2. REMOVE POWER STEERING SUCTION PORT UNION
(a) Remove the bolt and suction port union from the vane pump. |
 |
(b) Using a screwdriver, remove the O-ring from the suction port union.
3. REMOVE FLOW CONTROL VALVE ASSEMBLY
(a) Remove the pressure port union. |
 |
(b) Remove the O-ring from the pressure port union.
(c) Remove the flow control valve and compression spring.
4. REMOVE VANE PUMP REAR HOUSING
(a) Remove the 4 bolts and rear housing from the front housing. |
 |
(b) Using a screwdriver, remove the O-ring from the rear housing. Text in Illustration
HINT:
Tape the screwdriver tip before use. |
 |
5. REMOVE VANE PUMP SHAFT SUB-ASSEMBLY WITH PULLEY
(a) Using 2 screwdrivers, remove the snap ring from the vane pump shaft. |
 |
(b) Remove the vane pump shaft sub-assembly with pulley.
NOTICE:
Be careful not to drop or damage the vane pump shaft sub-assembly with pulley. If it is damaged, replace the vane pump assembly.
6. REMOVE VANE PUMP ROTOR
(a) Remove the 10 vane plates.
NOTICE:
Take care not to drop the vane plate. |
 |
(b) Remove the vane pump rotor.
7. REMOVE VANE PUMP CAM RING
(a) Remove the cam ring from the front housing. |
 |
8. REMOVE VANE PUMP FRONT SIDE PLATE
(a) Remove the front side plate from the front housing. |
 |
(b) Using a screwdriver, remove the O-ring from the front side plate. Text in Illustration
HINT:
Tape the screwdriver tip before use. |
 |
(c) Remove the O-ring from the front housing. |
 |
9. REMOVE VANE PUMP HOUSING OIL SEAL
(a) Using a screwdriver and piece of cloth, pry out the oil seal. Text in Illustration
NOTICE:
Be careful not to damage the front housing. |
 |
|