Vehicle Interior
Disassembly
In this manual: Vehicle Interior
~1min read
DISASSEMBLYPROCEDURE1. REMOVE HOOD BULGE ASSEMBLY
(a) Put protective tape around the hood bulge assembly. Text in Illustration
(c) Detach the 8 clips and remove the hood bulge assembly. 2. REMOVE HOOD TO RADIATOR SUPPORT SEAL
(a) Using a clip remover, remove the 10 clips and hood to radiator support seal. 3. REMOVE HOOD INSULATOR (w/ Hood Insulator)
(a) Using a clip remover, remove the 10 clips. (b) Detach the 2 guides and remove the hood insulator. 4. REMOVE FRONT WASHER NOZZLE AND HOSE ASSEMBLY 5. REMOVE WASHER HOSE ASSEMBLY
(a) Disconnect the washer hose assembly. (b) Detach the 3 clamps and remove the washer hose assembly. |
Was this page helpful?

