INSPECTION
PROCEDURE
1. INSPECT STEERING COLUMN ASSEMBLY
(a) Measure the length of the steering main shaft.
Standard length(A):
529.5 mm (1.74 ft.) |
 |
(b) Inspect the bushings.
(1) Check that the 2 bushings are securely installed to the steering column assembly. Text in Illustration
If the bushings are missing or damaged, replace the steering column assembly with a new one. |
 |
(2) Check the 2 bushings for deformation and damage.
If the bushings are deformed or damaged, replace the steering column assembly with a new one.
(c) Inspect the capsules.
(1) Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.
Standard Dimension:
A | B |
3 mm (0.118 in.) |
10 mm (0.394 in.) |
Text in Illustration
If the capsules are not positioned as specified, replace the steering column assembly with a new one. |
 |
(2) Check the 2 capsules for deformation and damage.
If either of the capsules is deformed, loose, missing or damaged, replace the steering column assembly with a new one. |
Was this page helpful?