Vehicle Interior
Inspection
In this manual: Vehicle Interior
~1min read
INSPECTIONPROCEDURE1. INSPECT SKID CONTROL BUZZER ASSEMBLY
(b) Disconnect the skid control buzzer connector. (c) Check the connector and terminals for deformation and corrosion. OK: No deformation or corrosion. (d) Connect a positive (+) lead from the battery to terminal 1, and a negative (-) lead to terminal 2 of the skid control buzzer, and check that the buzzer sounds. OK: The skid control buzzer assembly sounds. If the result is not as specified, replace the skid control buzzer assembly. |
Was this page helpful?
