Vehicle Interior
Installation
In this manual: Vehicle Interior
~1min read
INSTALLATION
PROCEDURE
1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Install the curtain shield airbag with the 8 bolts.
Torque:
11 N·m {112 kgf·cm, 8 ft·lbf}
NOTICE:
Do not twist the curtain shield airbag when installing it.
(b) Connect the connector.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.
2. INSTALL ROOF HEADLINING ASSEMBLY
Click here
![]()
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click here ![]()
4. CHECK SRS WARNING LIGHT
Click here ![]()
Was this page helpful?