Vehicle Interior
Installation
In this manual: Vehicle Interior
~1min read
INSTALLATIONPROCEDURE1. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
(b) Attach the 2 claws to install the DLC3. (c) Install the 4 bolts to install the instrument panel airbag. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH 3. INSTALL INSTRUMENT SIDE PANEL LH 4. INSTALL COWL SIDE TRIM BOARD LH 5. INSTALL FRONT DOOR SCUFF PLATE LH 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page 7. CHECK SRS WARNING LIGHT (a) Check the SRS warning light (See page |
Was this page helpful?

